Showing posts with label mid-scale. Show all posts
Showing posts with label mid-scale. Show all posts

20160101

Happy New Year 2K16!

My New Year's resolution is to post more often... twice a month is my minimum goal.

So to start off 2K16 here is what I've been putzing with:


base: Hot Wheels Mid-Scale (1/50) 1959 Chevrolet Impala.
rear wheels: the front axle from a Fastlane haul truck (those giant mining dump trucks).
front wheels: axel from a "Mars Attacks" truck from Mantic.

scale mini: Wargames Foundry

The haul truck wheels are hollow, so there will be some filling or plating with plasticard. I'd like to do a bladed front bumper, and a pintle mount or turret. Windows will be armored over, and I'm leaning toward a rusty rat-rod type paint scheme. The back bumper is also pretty high, so I might sling two oil drums under the boot.

20150825

(Roughly) 28mm Scale Tram and Bendy Bus

So I stopped at Toys-R-Us today on the way home from Kanazawa. Came across two roughly game scale vehicles in the FastLane isle. 


First up is the Mercedes-Benz Bendy Bus. I's about 58mm wide and 75mm to the roof... I think it looks a bit big, but if I re-size the wheels down a bit, I think it will ride at a better height and mesh much better with the 1/50 scale cars and 1/48 armor I use. Have to do something about the slight jackknife at the joint too,,, perhaps some weights.



Next up is the City Tram, it is a bit larger... about 80mm to the roof, but only 50mm wide. The doors are big, but perhaps if I mod it just a bit as a Subway/El and use a platform... There are some good game size trains in japan, but each car runs twice what this whole thing cost.

Both toys are shown with a larger 28mm Copplestone Castings trooper standing alongside, and a true 28mm EM4 (ex-Grenadier FW) trooper in the doorway. both are on plastic Reaper bases, and still fit in the doorways, which is a nice thing.

20150812

I actually did some hobby stuff.

First vacation day in the new house... no kids, no wife... went to the Japan Motorcar Museum and shot about 400 photos of cars before my battery gave out, picked up a couple 1/48 scale Fiats in the gift shop... lunch, home improvement store for washers, and other odds and ends... then I actually did something directly game related:


Three cars (2 previously mentioned diecast Fiat 500F's, and one plastic BMW 7 series) taken apart, bodies abraded and primed; 27 washers glued into 27 Reaper plastic round bases; 5 EM4/ex-Grenadier Future Warriors minis, 2 Copplestone Castings Future Wars minis, 4 Northstar Yakuza Gangsters minis, and one Empress Afghan Insurgent mini, cleaned, based and primed.

I actually did some hobby stuff today. first time in years.

Now for some Sons of Anarchy before they get home...

20141209

Hong Kong Police Cars

First draft of police car decals, version: modern HK, for my "Fistful of Kung Fu" forces.

Layout is based on the 1/50 scale BMW 7 series models I have - and is a pretty traditional jam sandwich design. Hong Kong does have British-style Battenburg cruisers but they are limited to traffic division vehicles, standard patrol cars are still like this.

Optimized for clear decal film printed and applied to a white car. Rear bumper decal is over printed to allow it to be wrapped, and the rear plate text will be adhered over a yellow painted plate.

20141105

MSG Mechanic 001 Wheeled Command Post Carrier/Missile ADA Vehicle

New vehicles... Watching 'Streets of Fire' and test assembling this MSG snap-fit kit this morning.


The kit, by Kotobukiya, is a good size for 28mm, though I'd like to kitbash a rear drop ramp, and redo the hatches to something slightly bigger. For about 1000 yen it's a pretty nice vehicle, that assembles very quickly, and features swappable command vehicle and ADA roofs.


In command post carrier mode she measures:
Length: 118.4mm
Width: 58.8mm
Height: 54.5mm (roof) / 58.9mm (including gun)
The air defense missile carrier version measures:
Length: 118.4mm
Width: 58.8mm
Height: 71.7mm (top of radome)




Kotobukiya also makes tracked vehicle with armored fighting vehicle (AFV) and engineer recovery vehicle variants... I will be needing several of each.

20141027

Police Cars and Taxi Cabs (Happy 100th Post)

I'm still waiting for my shipment of cars from China. However I have not been idle. there has been much GIMPage; I've managed to nail down the designs for the police cruisers and taxis.

First, the Fuzz.



The model is a BMW 7 series (E65), however I am toying with the idea of converting the split grill into a single one, and blending away the trunk-lid halves of the tail light assemblies - leaving the sedan more generic. We'll see when they get here. Aside from that, I'm planning to add Valor-type lightbars, front push bars, and grill-mounted emergency lights (not the headlight modifications seen in the sketch).


After much back and forth, I decided on a conventional black and white scheme, with simple text markings. There are subtle nods to Hill Street Blues and the Blade films, but the design is original.I'd toyed with golden-yellow fender markings, but the sketches look much better with white, perhaps because the design is so simple.


Secondly, a Hack Job.


The taxi design is based on the taxi livery used in Almost Human, albeit made more conventional. I decided to add a hint of checkering to the C-pillars, and the registration text block is taken from the type seen on NYC taxis. I haven't done front or rear elevations yet, aside from "CityCab" and the car number on the trunk lid... I don't think I'll be adding anything else aside from, possibly, an aerial marking on the top surface of the trunk lid.

So, that's what I've been up to this week. I guess I should also mention that this is the 100th post. Woot. What started out years ago as a page to support my Delta Green Realms of Cthulhu game, morphed into a Savage Worlds weapons supplement (subsequently spun off on its own), and now serves as my general hobby journal. Hope you all enjoy what I have put up. I'm hoping the year ahead will lead to more regular projects and posts after we get settled in the new house. Fingers crossed.

20141021

Police Humvee Beginnings...

The experiment has begun... a black and white police Humvee (ala the 1996 scenes in Demolition Man).

I purchased a 1/48 scale Tamiya M998 "turtleback" kit from Amazon.jp a bit back, finally sat down a built up the major components.

 I started with a plan for painting black: it would be painted with German grey for the black mid-tone. With the goal of making the black as easy as possible I'd plotted the following battle plan: German grey base > black shade/wash > watercolor pencil highlights > flat topcoat.

Let's see how this works.


...

Well... um... it looked grey and white... not black and white. The shade made the grey more 3D, but still read as grey. *sigh* Into the Simple Green and scrubbed with a toothbrush for the hood and wheels. Chassis got a silver drybrush on the mechanicals. then, out came the black gesso. The frame and swingarms, and shock mounts were gesso'd black, as was the hood, wheels and body work. 


Here's where it is now... I need to touch up the bottom of the B pillars, a few points where the gesso contracted and exposed the under color, and clean up the roof line where it meets the black. The glass (not shown) has been gesso'd black on the insides; blackened windows allow models, diecasts, and resin casts to blend better on the table than some black, some clear - it also saves me from having to worry about the crew compartment. I also clipped the side view mirrors, they'd never survive on the table, and sans them, the Humvee will blend better with my other vehicles. Along the same lines, it's brush painted, not airbrushed or sprayed - bit easier to do here in Japan, and the same way I paint my people and bikes.

 It's still in subassemblies, Chassis, hood, A pillar structure, roof/hatch, body, doors and glass. I'd like to give the first drybrush before fixing the glass in place, and that will come after the decals are placed, which need to be ordered/created. I also need to order emergency lights. When all that is done, the quickshade, pencil highlights, and then dullcote.

Not sure when all that is going to play out, but I do have ideas for an open bed model (like the Hummer below) kitbash... so hopefully not so long.


20141015

Police Car Markings

I've ordered a number of 1/50 scale cars from a supplier in China... more on them when they arrive.

This has got me thinking about how to paint them. I have decided on the following:
  1. Traditional American black and white scheme, specifically one in which the pillars are NOT painted white, only the door panels and possibly the roof are.
  2. Generic markings. I've gone back and forth on this. Basically, it comes down to the fact that I don't have the room to store cars in various livery; thus generic "metropolitan" police markings will be used.

Design A

I have yet to decide on the exact design of the door markings, if a shield/star or patch will be included or not... my initial pen and ink sketch yielded the first "METRO POLICE" design (above), and I rather like the balance of it, however, I do think it's probably more appropriate for "police" to be printed larger than "metro." thus the two other designs.

Design B

Design C

Thoughts?

20140812

Tabletop Police Cars

Filling in some back posts from my time locked out. Originally posted on my supersecret Facebook page.

*******

A discussion on BBC Autos, and an acquaintance who makes Kustom cars here in Japan, got me thinking about designing a killer Restomod police car.

Here's my idea:

1977 Chevelle Malibu 350 4dr sedan (wagon for special services)

Swap the front clip for one from a '77 Olds Cutlass (both were essentially the same car); fill and cut the cowl to accommodate a '70 Chevelle SS grill; racing type suspension, with a slight forward cant; finish with Chevelle SS badges, and some deep-dish slotted aluminum wheels.


Now, if I can just get a high-res 3d model of this, stretch the design to be 1/50 in length and height, 1/43 in width... have a master printed, finished and cast in resin; should have a great sedan to use as a patrol car and taxi with my large-scale Hot Wheels.

20140416

Mid-Scale Wheel Swap

Filling in some back posts from my time locked out. Originally posted on my supersecret Facebook page.

*******

That awesome feeling when you realize these two vehicles have the same wheelbase....
Where is my Dremel?

Jada Big-Time 4WD Toyota Tacoma (1/64 labelled; actually closer to 1/55) on the left, Hot Wheela Mid-Scale Chevy Bel Air (nominally 1/50, but 1/43 in width) on the right.


20140407

A Plethora of Mid-Scales

Filling in some back posts from my time locked out. Originally posted on my supersecret Facebook page.

*******

So Amazon Japan was getting rid of some mid-scale (1:50) Hot Wheels... my preferred, yet hard to find, cars for 28mm gaming. I bought all six cases. Don't tell my wife.

I now have:
1x Ferrari 360 Spider
1x Range Rover
1x VW Panel Bus
1x VW Beetle
1x Nissan 350Z
1x '70 Chevy Chevelle
1x '62 Pontiac Bonneville
1x '32 Ford Sedan Hot Rod
2x Hot Wheels Boneshaker
2x '70 Ford Mustang
2x '68 Cadillac
2x '64 Ford Galaxie 500
2x '69 Dodge Charger
2x '70 Plymouth Barracuda
2x '70 Chevy Camaro
2x '67 Pontiac GTO
2x '68 Chevy Camaro
3x Dodge Challenger Concept
3x '59 Cadillac Convertible
4x '57 Chevy Bel Air
4x '59 Chevy Impala
6x '65 Buick Riviera

...to add to the ones I already have.

Notice how good my son is being... he really wants to open all of daddy's toys...

20130421

Hot Wheels HIN Dodge Neon SRT-4 (mid-scale) and more...

So on the way home from work today I stopped by HOBBY OFF, basically a Half-Price Books for toys, models, and video games. Searching through the diecast cars led to a couple larger "1/64" Jada diecasts - that are actually about 1/55. Yeah, scale creep happens with diecast too.

Anyway, beside the register I found another display of diecast cars. There I discovered not only a few more 1/55s but also two Hot Wheels mid scales: a Dodge Neon SRT-4 and a VW Golf Mk4 (the Spinner in the pic is actually from the BladeRunner limited edition box set, not a find at HOBBY OFF).

I got them all and brought them home to measure and scale. I must get a proper pair of calipers for this in the future, but for the time being I make do with a tape measure. I measure length, width (without mirrors), width, height, and wheelbase. Calculations put all of the five I eyeballed as 1/55s as very close:
Jada '03 Infiniti G35 coupe = 1/56
Jada '03 Dodge Magnum R/T station wagon = 1/55
Jada '02 Nissan Silvia S15 coupe = 1/51
Jada Mitsubishi Lancer Evo VIII sedan = 1/54
Realtoy MB G-Wagon 460 2-dr = 1/56

True, the Silvia (far left) is a bit big, but since it was a small car it mixes well with the others.

Hot Wheels mid-scales are sold as 1/50s. I have a number of them, mostly 60s and 70s American muscle from the G Machines line with a few modern imports from the Dropstars line. These cars are well proportioned for minis, typically 1/50 in all dimensions but width, which is exaggerated to 1/43. Perfect for the exaggerated bulk of mini sculpts. 28mm figures aren't dwarfed by the car when standing beside it, but can reasonably fit inside with appropriate shoulder room. Truly the best of both worlds.

Sadly the mid-scale range seems to have been abandoned by HW, and the cars tend to fetch premium prices due to the HW collector's community. When I seached for more SRT-4s, with the idea of using the sedans as cop cars, I found them to run for about $50. That's crazy. Still, I'll pick them up as I see them, hoping to replace the 55s in the future.

20120816

28mm Vehicles

Perhaps the most divisive issue in miniature gaming is that of vehicle scale. One camp swears by 1/43 scale diecasts, the other by 1/55 scale.  Personally I'm a 1/55 guy. I'll tell you why.

1/43 scale vehicles are just ridiculously huge.  No one, of average height,  should risk being hit in the side of the helmet by the sideview mirror of a sedan.  I have some 1/43s but they were to support my Honourable Lead Boiler Suit 1/48 Ultra Moderns - a line that is no longer supported.  Cheap 1/43 diecasts are less common than they used to be, and most of them vary significantly in scale from 1/48 to 1/32 (1/32 is plastic army men size BTW).  It also shouldn't be a 20ft movement to cross from the left fender to the right.

Hot Wheels put out a load of 1/50 scale diecasts over the last decade.  "1/50" was more of a label than an accurate scale - they were made to fit the package (my Rat Rods '52 Beetle is closer to 1/43, and the DropStars Maybach is about 1/55, with most everything else somewhere in between).  They were mostly muscle cars, all of them pimped out, but they tended to be exaggerated in width making them a pretty match for many larger 28mm minis. Yes I said larger 28s. Few 28s are actually 28mm, most modern lines are in the 32mm+ range.  Anyway Hot Wheels abandoned mid scale diecasts (Rat rods, G Machines, DropStars) a couple years ago and, with the Hot Wheels collectors' market, they've become rather pricey.

I discovered Siku, a German brand of diecast car, at the Village Vanguard store in Kanazawa about a decade ago.  The nominal scale is 1/55, with some slight variation due to package space (but far less than with Hot Wheels or Matchbox).  1/55 matches my minis very well.  Most sedans came up to mid chest and SUVs were just short enough for the tall guys to look over.  I prefer Foundry Street Violence, Copplestone Castings, Artizan, The Assault Group, and EM4s (ex-Grenadier) Future Wars minis.  These manufacturers make up most of my miniature purchases and all of them mix very well. They are also rather small compared to newer "28s" like Corvus Belli, Victory Force, Mantic, Dust Tactics, et cetera.  Scale creep.  Since my minis tend to be closer to 28mm at eye level, and I base on washers not GW plastic bases, the 1/55 scale vehicles look great beside them. Yes the minis are a bit broad, but height-wise they look great. I'd rather have them look a little crowded in the car than dwarfed by it on the table.


I've discovered over time a number of other 1/55 scale cars, older Majorettes, Matchbox and Hot Wheels casts of sub-compacts, and a number of "1/64" scale Jada releases. I'm not sure why Jada calls them 1/64 - they are much closer to 1/55 - marketing towards collectors I suppose.  I started picking up a few cars here and there that looked right.  Then Battle Machines came out and I got all of them except the rigs.  A little small (1/58 or so) but close enough.  Then came Hero Patrol.

Since the majority of my vehicles are German Siku's or French Majorettes, I was sorely in need of US police cars.  I found a supply of Corgi Crown Victorias in Chicago Police livery in 1/55 and cleaned the store out. But they numbered only six, and are nigh impossible to find on the intertubes.  Then, last year, at WalMart, of all places, I found Jada's Hero Patrol line.  Chevy Impalas, Chevy Tahoes, and Dodge Charger police cars measuring just a shade smaller than 1/55 - and less than $3 a piece. I bought dozens.  A second wave (with Pittsburgh PD Impalas!), and now third have been released, featuring numerous department schemes and I am intent on collecting more.

Recently I discovered MegaBloks Need For Speed Action Scale vehicles in the clearance isle of Target.  Basically a Lego-type chassis with a single piece front, single piece back, two doors and a top.  Easiest building set ever - and in 1/55.  The vehicles are mostly high performance cars (as the NFS license would suggest) including Skylines, Porsche 911s and the Audi R8. The Audi R8 and McLaren MP4-12C are two I models I scooped up - the supercars make rather decent near future vehicles - and McLaren MP4-12C police cars are awesome!  The body pieces are all snapped to a standard size chassis - making for some slight variations in scale, and the body parts are tight fitting and not interchangeable (no McLaren front on a Porsche), but you can "damage" vehicles by removing pieces... if you don't mind revealing the Lego-type nubs.

In addition to civilian and police cars, I've tracked down a couple Chinese made diecast BTR-80s, two Russian army trucks, a New Ray AH-64 Apache gunship, and a couple M-48 Patton tanks (plastic army men tanks are spot on - look for older Timmee casts that are much more detailed), all in 1/55.  I've also added a pair of MotorMax Hind Ds and a few New Ray UH-60 Blackhawks in 1/60.  I find that larger helicopters can be a bit smaller scale on the table top and not look ridiculous.  I'm also looking to pick up a couple New Ray CH-46s in 1/55, and maybe their 1/60 scale Chinook.

Imagine trying to field those in 1/43 or 1/48 scale... there'd be no room for the minis to move.